Product Detail
RF300 Large Loop
Antenna
Developed specifically to meet the requirements of EN55015 for the testing of luminaires. Fully compliant and calibrated with 3 orthogonal loops mounted on a wooden frame. Loop diameter: 2 metre. Calibration factors supplied on disk read by EMCEngineer Windows software The RF300 is a fully compliant, calibrated 2 metre large loop antenna manufactured to comply with European product specific standard EN55015 section 7.2 and annex B (EN55015 is specific to luminaires).
The Calibrated frequency range of the RF300 is 9 KHz to 30 MHz and each antenna is supplied complete with antenna factor data so that it can be used with any EMC receiver or spectrum analyser capable of antenna factor compensation.
The performance of the loops is matched to the 'ideal' loop curves as shown in EN55015 fig B4 using the prescribed test set-up.
The RF300 is a complete 3 axis antenna with a switching unit to select each loop in turn. The loops are 2 metres in diameter with the lowest point 0.5 metres above ground and are fitted with specially designed current transducers in fully screened housings.
The main framework is designed in wood with 25 mm diameter plastic tubing for the loops.
When erected, a 2 metre large loop antenna is surprisingly large item so for ease of transportation and storage, the RF300 is designed to be collapsible down to sub units of convenient size.
When used with the EMCEngineer software supplied with the Laplace test kits, the software will automatically compensate for the antenna characteristics and display the EN55015 limits corrected for the 2 metre loops.
Specification Design: Fully compliant with EN55015. Loops: Triple independent loops. 2 metre diameter. Sensors: Matched inductively coupled. Selector: Loop selection by patch panel switch. Output: 50 ohm BNC. Calibration: Each axis tested and correction data included with antenna. Antenna Factor: Matched to EN55015, figure B4. Power required: None Physical: Height: 2.6 metres Width (X): 2.1 metres Width (X): 2.1 metres
View Adobe PDF File
|
|
||
| LAPLACE INSTRUMENTS
LTD 3B, Middlebrook Way, Holt Road, Cromer, Norfolk, NR27 9JR, UK |
Tel: + 44 (0)1263 515160 Fax: + 44 (0)1263 512532 E-mail:tech@laplace.co.uk |
|
|
|
||
