Product Detail
Power Line Interference
Probe
Compliance
The PLIP is designed to comply with the CIPR16 requirements for a voltage probe. The design incorporates several features that are in addition to the basic CISPR16 specifications.
These offer three major advantages:Safety Complete galvanic isolation for protection against line voltages.
Sensitivity The PLIP incorporates a 30dB RF amplifier. This results in a nominal antenna factor (insertion loss) of 0dB, against that of a 'conventional' voltage probe of 30dB.
Protection The PLIP features signal filtering with transient limiter and output clamping. The net result is that any analyser or receiver connected to the output of the PLIP is protected against damage due to high or transient signal conditions.
Specification Compliance To CISPR16 (para. 12.2) Voltage probe Frequency Range 9KHz - 30MHz Input voltage 275V AC 50/60Hz 380V DC Input current 63mA AC 50Hz (nom) 0.8mA DC max Input impedance 1500 ohms Output impedance 50 ohms Input dynamic range 70dB Overall insertion loss 0 +/-2dB Voltage indicator Neon, 70V min operating threshold Test probes Double insulated GS38 and IEC1010 compliant, fitted with 440V 33kA fuse rated at 500mA Isolation 1KV max Output connector BNC Power 230V 50Hz mains adapter produces 12V DC 80mA for amplifier (115V 50Hz option)
Physical Temperature range -5 C to 55 C Relative humidity 20% to 80% Carry case size 35cm x 25cm x 9 cm Carry case weight less than 2 Kg
View Adobe PDF File
|
|
||
| LAPLACE INSTRUMENTS
LTD 3B, Middlebrook Way, Holt Road, Cromer, Norfolk, NR27 9JR, UK |
Tel: + 44 (0)1263 515160 Fax: + 44 (0)1263 512532 E-mail:tech@laplace.co.uk |
|
|
|
||
