Product Details
A complete integrated system based on the LaplaCell range which delivers a turnkey solution for the emissions and immunity compliance testing of your product. This provides a convenient and practical bench top solution for the testing of small products without the problems of test site or ambient noise.
It includes:
- The LaplaCell 300 or LaplaCell 600 test chamber.
- RF Power amplifier. The RF1100 and RF1200 are fixed gain 'building block' amplifiers which will boost any suitable signal to the levels required to drive an antenna or cell in order to create the specified V/m field strength.
- Synthesiser. The Laplace RF1000 and RF2000 are PC controlled via the serial or the USB port. Generates the required signals and controls the amplitude to produce required signals and controls the amplitude to produce the required field strength inside the cell. Also interfaces simple EUT status signal back to PC and generates simple 'prompt' signal to EUT under PC control to produce required signals and controls.
- Emissions analyser. The Laplace SA1000 is a powerful EMC measurement analyser, specifically developed for the compliance testing of products to all US, EU and international standards. Fully matched to LaplaCell to deliver accurate results within a windows environment.
- SA1000 PC Windows software for the control, display and storage of both emissions and immunity tests.
|
|
||
| LAPLACE INSTRUMENTS
LTD 3B, Middlebrook Way, Holt Road, Cromer, Norfolk, NR27 9JR, UK |
Tel: + 44 (0)1263 515160 Fax: + 44 (0)1263 512532 E-mail:tech@laplace.co.uk |
|
|
|
||
