Product Detail
Active Receive
Antenna
The ideal antenna for EMC testing in restricted spaces.
- Small size particularly ideal for use in chambers.
- High sensitivity, better than typical coventional antennas.
- Can be used with any EMC analyser.
The Active Receive Antenna has been designed as a compact emissions antenna. The small size makes it particularly suitable for use in anechoic chambers, however it can also be used on an Open Area Test Site (OATS).
The unit is powered from a single PP3 battery. A green LED indicates that the antenna is active, a red LED indicates that the battery is low and should be recharged or replaced. There is also an external DC option where the DC is supplied via the RF cable.
There are two sets of Dipole Antenna Elements (DAE) which can be used. The unit is supplied with one set as standard (DAE01). For higher sensitivity at the low frequencies DAE02 should be used.
Full antenna factor data is included with each ARA.
Specification Electrical Frequency range: 30MHz - 1GHz Output VSWR: 1.5:1 Dynamic range: 90dB Mechanical Dimensions Length Body:
150mm Length Connector:
168mm Width Body:
34mm Width DAE01:
234mm Width DAE02:
568mm Depth:
34mm Weight: 385g Connector: BNC female Power Supply Current: 70mA External DC: 9-16V PP3 9V battery: NiMH 2 hours
Alkaline 4 hours (typ)
|
|
||
| LAPLACE INSTRUMENTS
LTD 3B, Middlebrook Way, Holt Road, Cromer, Norfolk, NR27 9JR, UK |
Tel: + 44 (0)1263 515160 Fax: + 44 (0)1263 512532 E-mail:tech@laplace.co.uk |
|
|
|
||
