EM Aware®

ESD Event Monitors
 

High Sensitivity EM AwareÔ ESD Event Monitors can reliably detect any relevant ESD event in both polarities. Adjustable Sensitivity Sensitivity of each monitor can be individually adjusted either locally manually or remotely. Networking Each EM AwareÔ monitor is equipped to work with the majority of existing industrial networks or data acquisition system. Indication Each EM AwareÔ monitor provides the following indication: Built-in LED indication of ESD Event - all models Built-in LED indication of ESD Event magnitude - CTC033 and CTC034 Audible tone indicating ESD Event with Sound On/Off - all models LED Indication of ESD Event Hold with Reset - all models  ESD Event Count -- CTC034
Don't Assume -- Verify! Wrist straps, anti-static chairs, conductive floors, ionizers -- if you have them, you must feel safe already. Then why are you still interested in yet more protection against ESD?  Preventive measures work on assumption that no ESD events are generated if these measures are properly implemented. However assumption is not the word you want to hear when your production yield is falling and losses are piling up.  EM Aware® ESD Event monitors work on verification rather than on assumption.  EM Aware® lets you know about any relevant ESD Events and their magnitude.  EM ® tells you whether your ESD-preventive measures work, as they should.  EM Aware® provides input to virtually any data logger so that you know ESD environment on your production floor at any time.  EM Aware® can be connected to your existing network to provide an important information relevant to your bottom line.
EM Aware® ESD Event monitors are placed in the areas where ESD Events are not tolerated. Indication of an ESD event is a sure sign that your ESD-preventive measures need immediate attention.  Miniature and unobtrusive, EM Aware® monitors can be placed on workbenches and equipment. Connected into a network, EM Aware® monitors can give you information on location of ESD Events, their frequency and magnitude. Collected information can be tracked day-to-day to monitor ESD environment and, ultimately, improve yield.  EM Aware® shortens corrective-action loop from finding ESD-related problems by yield loss to real-time actions.

Main Page

Comments/Feedback

If you have any comments, suggestions regarding our site or  require further product  information please use the feedback form

Revised: 21 September, 2004
Copyright © Laplace Instruments 1998, all rights reserved