Product Detail
SCS-800
Compact, High-Performance Anti-Alias Low-Pass Filter, Amplifier and Signal Conditioning System for Portable Data Acquisition Applications
- Signal conditioning front-end to popular A/Ds converters
- Expandable up to 64 anti-alias low-pass filter, amplifier, and signal conditioning channels
- Modular architecture for maximum flexibility
- Portable with convenient carrying handle
- RS-232 communication to host
- Stores last configuration in nonvolatile memory
- Power choices:
- AC line
- Optional rechargeable battery
- External source such as a car battery
Signal Conditioning Options
- Variety of signal conditioning modules:
- 8-channel programmable amplifier and anti-alias low-pass filter
- Programmable amplifier and analog filter for high-speed cutoff frequencies from 200kHz to 2MHz (optional bandpass filter)
- Strain gage amplifier
- Thermocouple amplifier
Software
- Includes SystemView graphical control software for:
- Windows 95/98/NT
- 3rd party software: LabVIEW, HP VEE and Dasylab
Applications
- Choose your configuration:
- Benchtop/local
- Remote with RS232 interface
Functional Description
High-performance Platform
The SCS-800 is a high-performance signal conditioning system for PC-based data acquisition. An SCS-800 system consists of a battery or AC operable chassis and up to 8 multi-channel modules.
The SCS-800 takes advantage of the increasing capabilities of notebook and desktop PCs by leveraging off the PC's strengths. It provides a high-performance, flexible solution whether used as a conditioning front-end for desktop systems in the factory or as a mobile solution for portable systems in the field.
Compact
The SCS-800 chassis has the same footprint as a typical notebook PC. The SCS-800 modules share this small form factor. With modules that filter and amplify up to 8 channels, the SCS-800 delivers compact signal conditioning for larger systems.
Modular Architecture
The design philosophy of the SCS-800 was to create a self-contained system with a modular architecture that breaks new ground in flexibility. Such a modular construction allows for configuration of a variety of modules that will form the basis of the system and match specific application needs.
Expandable
Expanding the system's capacity simply involves plugging additional modules into the chassis as test requirements change.
Easy Configuration and Setup
Available for Windows 95/NT/3.1 and popular third-party software, SystemView is easy-to-use application software for graphically configuring key parameters within minutes. A controller card stores programmed commands in nonvolatile memory, allowing for system power up to the last selected configuration.
Modules
The SCS-800 product family currently provides quality anti-aliasing filters that conform to the 3U Eurocard form factor. (Refer to the separate module data sheets for more information.) All input and output connections are made from the front of the unit, easing maintenance and eliminating the need to struggle with complex field wiring to service or modify the SCS-800 system.
Dimensions: 6.98" D x 0.78" H x 5.06" W (177.5mm x 19.92mm x 128.5mm) Power requirements: 5.0V @ 330mA max(per module) 15.0V @ 150mA max
Power
The SCS-800 can be powered from a variety of sources to accommodate various applications. For stationary or desktop applications, the SCS-800 comes standard with a reliable, low-noise AC power supply that supplies regulated DC power to all boards at positive and negative voltages.
For portable applications, an optional rechargeable battery provides up to 16 hours of operation with 8 installed channels. The battery eliminates ground loops and power supply noise. A companion dual-stage battery charger charges a completely exhausted battery in 8 to 11 hours while the system is operating.
The SCS-800 also can be powered directly from a standard 12V car battery. An optional cable permits the system to be plugged directly into an automobile cigarette lighter.
Chassis
The SCS-800 chassis houses the modules in an impact and corrosion resistant case. It features a carrying handle, front plexiglass cover, tilt feet, and a front-panel LED that indicates power on/off status. A built-in RS232 serial interface provides a convenient, direct connection to the standard serial port on a host PC for remote control.
For more detail the product data sheets are available in PDF format.
- SCS-800 / SCS-801 Compact, High-performance signal conditioning for portable and desktop Applications. (76 KB).
- SCS-812 Elliptic or linear phase 8-channel amplifier and low-pass filter module for the SCS-800 signal conditioning system. (83 KB)
- SCS-814 / SCS-815 6-pole Butterworth and Bessel, 8-channel amplifier and low-pass filter module for the scs-800 signal conditioning system. (99 KB).
- SCS-816 / SCS-817 8-pole Butterworth and Bessel 8-channel amplifier and low-pass filter modules for the SCS-800 signal conditioning system. (129 KB).
- SCS-181 / SCS 819 4-pole Butterworth and Bessel 8-channel amplifier and low-pass filter modules for the SCS-800 signal conditioning system. (129 KB).
- SCS-824 / SCS-825 / SCS-826 / SCS-827, 4 channel strain gauge amplifier module for the SCS-800 signal conditioning system. (87 KB).
- SCS-830 / SCS-832, 100KHz to 2MHz tunable analog butterworth or bessel 1-channel amplifier and low pass filter modules. (79 KB).
|
|
||
| LAPLACE INSTRUMENTS
LTD 3B, Middlebrook Way, Holt Road, Cromer, Norfolk, NR27 9JR, UK |
Tel: + 44 (0)1263 515160 Fax: + 44 (0)1263 512532 E-mail:tech@laplace.co.uk |
|
|
|
||
